What is a walk behind concrete saw used for?
Walk-behind saws are large power tools used to cut concrete or masonry stone. Traditionally used on sidewalks, asphalt, concrete driveways, basement floors, warehouse floors, highways, or any application that requires sawing of horizontal concrete or asphalt. Walk-behind saw blades range from 14″ all the way to 32.”
How deep does a walk behind concrete saw cut?
If you are removing existing cured concrete the saw cuts are normally only 2″ deep on a 4″ slab. This sufficiently weakens the cement and leaves a smooth joint at the surface where it is visible. Once you use an electric breaker or air hammer the rest of it will break off right beneath the saw cut.
How much does a walk behind concrete saw weight?
MK Diamond 159345 CX-3 Series Walk-Behind Concrete Saw
| Brand | MK |
|---|---|
| Blade Length | 14 Inches |
| Item Dimensions LxWxH | 32 x 19 x 42 inches |
| Power Source | Corded Electric |
| Item Weight | 116 Pounds |
Do you push or pull a walk behind concrete saw?
Always let the saw do the work; simply guide its direction, but don’t push it down into the concrete. You only need a quarter-inch cut at this point, but if the saw bites in a bit deeper, that’s fine too. This first guided cut will ensure you keep your cuts straight during the rest of the project.
What is a con saw used for?
Soft start, well balanced, less vibration, lower noise and no exhaust fumes Electric concrete saws are high-production, hand-held saws that are ideal for cutting concrete, stone, asphalt, steel and other tough materials.
How long will a concrete saw blade last?
They can last between 12 and 120 hours of continuous use, depending on the quality of the blade and material they’re used to cut.
How close can a concrete saw cut to a wall?
“We can cut through a 10-inch thick wall with a 14-inch blade,” says Zoni. “You can only cut 5-1/2 inches with a 14-inch blade on a cut-off saw.” A 2 x 4 shot into the concrete wall guides the smaller saw along the cut.
Can I cut concrete with a circular saw?
Use a standard circular saw, equipped with a corundum or diamond blade, for small tasks. For slabs, it’s best to cut through the top inch, then use a sledgehammer to break off the rest. The jagged edge left below the cutting line provides a good rough edge for the new concrete to bond to.
How deep will a 12 inch concrete saw cut?
| Cured Concrete/Asphalt Blades | ||
|---|---|---|
| Diameter | Cutting Depth* | |
| 12″ | (305mm) | 4″ |
| 14″ | (356mm) | 5″ |
| 18″ | (457mm) | 7″ |
How hard is it to cut concrete?
Time it right. Wet concrete is very difficult to cut, and fully cured concrete can fracture as it’s being cut. So if possible, cut the concrete when it’s hard but only half cured. The cut will come out smoother with less dust.
How do you cut a 4 inch concrete slab?
What kind of concrete saw walk behind a saw?
Edco SS20-23.5 23HP Kohler Propane Concrete Saw Walk Behind 187 hours Great Unit Edco SS20-23.5 23HP Kohler Propane Concrete Saw Walk Behind 187 hours Great Unit Edco SS20-23.5 23HP Kohler Propane Concrete Saw Wa…
Are there concrete saws that cut pavers for sale?
2021 HUSQVARNA, FS400LV Asphalt / Pavers / Concrete Equipment – Concrete Equipment – Concrete Saws, WALK BEHIND SAW FS400LVSerial Number: 20210200271… 2021 HUSQVARNA, SOFF-CUT 150 Asphalt / Pavers / Concrete Equipment – Concrete Equipment – Concrete Saws, SOFF-CUTT 150Serial Number: 20210300863…
What kind of concrete saw can I rent?
Available for Long or Short term Rental– Contact Atlantic Lift Systems NORTON CLIPPER C1318P 18″ WALK BEHIND PUSH SAW– For curb cutting, expansion j… FOR RENT!Husqvarna K760 Concrete Saw, Husqvarna rapid cut saw will cut masonry, concrete, asphalt, metal and much more. 14-Inch blade guard allows for…
What kind of saw walk behind 20 inch blade?
2017 Edco SS20-20H Honda 20HP Concrete Saw Walk Behind Self Propelled 20 inch blade America America Click images to enlarge Description 2017 Edco SS20-20H Honda 20HP Concrete Saw Walk Behind Self Propelled 20 inc…